|
FEATURES
- Engineered specifically for two-stroke engines
- Compatible with ALL NMMA & API accredited two-stroke oils
- Reduces friction, operating temperatures & wear
- Improves power output, compression & efficiency
- Cleans and protects your engine
- Optimizes performance
- Improves cold starts
- Pure petroleum-based
- Will not void warranties
- Backed by our $5 million product liability insurance
- Non corrosive
- No solids, PTFE or metal
- Mix at 2 oz (60 ml) to 5 gal (20L) or 5% to oil reservoir
- Uses include snowmobiles, jet skis, motorcycles, chainsaws,
outboards, lawn equipment etc.
|
Bi-Tron XL2,
our
Two-Stroke
product, is uniquely engineered
to add lubricity to your mixed gas and to coat all metal surfaces with a
layer of positively charged oil. Bi-Tron XL2 is compatible with All
two-stroke applications. It will dramatically reduce engine wear and noise
due to friction and drag in the system. As a result operating temperatures
will drop and the likelihood of catastrophic seizure will be diminished.
It will clean and protect your engine from hydrocarbon build-up, ensuring
spark plugs and rings remain free to operate at their maximum potential.
Bi-Tron XL2
dramatically improves the power output, compression and
efficiency of the motor. It makes cold starts easier and reduces the wear
caused by them. This product raises idle and top-end RPMs, as well as top
speed and horsepower.
Bi-Tron
does not replace the oil but enhances its performance and
treats the metal. It is completely compatible with all NMMA and API
accredited two-stroke oils.
Results should include:
- Increased power due to lower operating temperature and reduced friction.
- Increased compression because of improved piston ring sealing.
- Decreased deposits on spark plugs, combustion chamber and pistons.
- Protects against piston seizure.
- Quieter and smoother running engine.
Mix the gas and the two-stroke oil as per manufacturers recommendations,
then add 60 ml (2 oz.) to each 20L (5 gal.) of premixed fuel and SHAKE WELL.
OR add 60 ml (2 oz.) to the two-stoke oil before you add the fuel. OR if
you are adding it to an oil reservoir for an oil injection system use the
product at a 5% ratio to the two-stroke oil.
Bi-Tron XL2 Two-Stroke Metal Treatment contains no solids, no PTFE’s
(Ploy Tetra Fluoro Ethylene, Teflon™), no metals and is completely
non-corrosive. It cannot have a negative effect.
Boiling Point For Component
Vapor Pressure For Component
Specific Vapor Density Air = 1
Specific Gravity
Percent Volatiles
Evaporation Rate
Flash Point: Open Cup
Explosive Limit: (Lowest value of component)
TBN
|
32% 153.33C (300F) @ 760.00 mm Hg
32% 3.00 mm Hg @20c (68.00F)
1.0
1.09 @ 21C (69.8F)
30-35%
Slower than ether
126C (259F)
Lower 1% Upper 7%
4.6
|
Available Sizes
354 ml (12 oz.) bottle (case of 6)
4L (1 gal. US) jug
10L (2.5 gal. US) pail
|
Item Code
30441
30461
30481
|
|
